Before connecting your device with OBSBOT Talent, turn the UVC mode on in the Obsbot Start App or OBSBOT Center software.

• You can utilize a USB-A cable to connect the OBSBOT Tail Air to OBSBOT Talent directly.
• Tap on the main screen.
• Select a source in the Create New Scene window to add, and then it enters the Scene Editor page.

• Select WEBCAM 1 or WEBCAM 2.

• After selection, the video input of the OBSBOT Tail Air will appear on your Talent device.

• You can utilize a Micro HDMI to HDMI cable to directly connect the OBSBOT Tail Air to OBSBOT Talent. Due to its Micro HDMI port (Type D HDMI), it supports crystal-clear video output up to 4K@30fps and 1080P@60fps.
• Tap on the main screen.
• Select a source in the Create New Scene window to add, and then it enters the Scene Editor page.

• Select HDMI 1 or HDMI 2.

• Once selected, the OBSBOT Tail Air video Input will appear in your Talent device.

Before linking the OBSBOT Tail Air to OBSBOT Talent, you'll need:

• OBSBOT Tail Air camera
• Obsbot Start App or OBSBOT Center software
• USB-C to Ethernet Adapter (necessary for a wired connection)
• Net Switcher or Router (necessary for a wired connection)
• Ethernet Cable (necessary for a wired connection)

NDI Connection

Wired Connection

• Utilize a USB-C to Ethernet Adapter to connect your OBSBOT Tail Air to a Net Switcher or Router.
• Use Talent's Ethernet port to connect your OBSBOT Talent to a network switcher or router.

Wireless Connection

• Drag OBSBOT's status bar and find the Wi-Fi setting.

• Connect your OBSBOT Tail Air and OBSBOT Talent to the wireless network.
• Make sure your OBSBOT Tail Air and OBSBOT Talent are all on the same network.

Note:

Your OBSBOT Tail Air needs to turn the NDI mode on with an activated NDI License Key in the Obsbot Start App or OBSBOT Center software.

Step-by-Step Guide

• Tap on the main screen.
• Select a source in the Create New Scene window to add, and then it enters the Scene Editor page.

• Select NDI Stream.

• Select your OBSBOT Tail Air, you need to connect with Talent.

• After selection, the video input of the OBSBOT Tail Air will appear on your Talent device.

• You can find the PTZ control on the main screen.

• You can control OBSBOT webcam through the PTZ control.

SRT Connection

• Open Obsbot Start App on your phone and connect your Tail Air with it.
• Click "More Settings" to call out the settings panel.

• Click "SRT Settings" to enter the setting interface, you can also set in advance the frame rate, resolution, and further SRT parameters in "Media Setting".

• Switch to Listener mode and configure accordingly. The local IP address and local port are displayed by default and cannot be modified.

• Finish the configuration, click "Save", return to the upper setting interface, and enable SRT mode.

• Tap on the OBSBOT Talent main screen.
• Select a source in the Create New Scene window to add, and then it enters the Scene Editor page.

• Select SRT Stream.

• After entering the interface to create an SRT stream, you can add and modify the SRT stream information you set at OBSBOT Tail Air. After finishing the settings, click "Create".

• After selection, the video input of the OBSBOT Tail Air will appear on your Talent device.

RTMP Connection

• Tap on the OBSBOT Talent main screen.
• Select a source in the Create New Scene window to add, and then it enters the Scene Editor page.

• Select RTMP Push. You can find the RTMP URL.

• Open Obsbot Start App on your phone and connect your Tail Air with it. Press and hold the Live Stream/Record Button to access the live stream interface. 

• Select the "RTMP" option, then press "+" to create an RTMP stream.

• Input the corresponding information from the OBSBOT Talent and click "Add".

• Click the "Start" button.

• After entering the interface to create an RTMP stream, you can add and modify RTMP stream information you set at OBSBOT Tail Air. After finishing the settings, click "Create".

• After selection, the video input of the OBSBOT Tail Air will appear on your Talent device.